DIY Flower Tower

This post may contain links to affiliate websites, such as Amazon and we receive an affiliate commission for any purchases made by you using these links.
Here Comes the Sun: DIY Flower Tower

I’m a sucker for tv commercials. Especially those home improvement store commercials where they show people tackling  outdoor projects. I just couldn’t resist making a flower tower this year. In past years, my porch decor has left a lot to be desired so I decided to ramp it up this year with a big statement piece: a DIY flower tower.

Now I will tell you that the flower tower isn’t the cheapest project. If you have some of the supplies already on hand it will help out a lot. 

Here’s what you need:

Here Comes the Sun: DIY Flower Tower

12 inch pot
Landscape fabric (mine was 4’x50′)
Galvanized Wire fencing (mine was 4’x50′)
Potting Soil (64 qt. bag)
Tin snips/wire cutter
Zip ties (preferably black)
Gloves
Flowers (mounding flowers like petunias work well)
Garden shovel
Craft/Utility knife
Here Comes the Sun: DIY Flower Tower


1. Unroll the wire enough to make a cylinder that fits snugly inside your pot.  Allow one square of overlap. Cut the wire with your tin snips and use zip ties to secure the wire together to form a cylinder.  Use enough zip ties to keep your cylinder stable.

2. Unroll the landscape fabric and cut it to a length so that it fits inside your wire cylinder. You can measure the length by rolling it around the outside of the cylinder and then cutting. Leave a bit of overlap so soil does not seep out the seam.


3. Place the landscape fabric inside the wire cylinder and fold it over the top of the galvanized wire fencing.

4. Using your craft knife, cut two slits through both layers of fabric, one above the metal rim and one below. Thread a zip tie through the slits to secure the fabric to the wire. Repeat on opposite side of the cylinder.

5. Now it’s time to fill your flower tower will soil. If you are strong enough to lift the bag of soil, you can just pour it in. Fill it 1/3 of the way and then water your soil. Fill another 1/3 and water again and then another 1/3 and water. If you are like me and the bag is a bit too heavy, just use a garden shovel or your hands to fill it up.

6. Using your craft knife, cut an “X” within one of the wire squares. 

7. Use your finger to dig out some space for your flower.

8. Plant the flower into the hole and close the flaps of the landscape fabric around the stem to prevent soil from seeping out when watering. Leave the bottom row of wire squares free of flowers so the other flowers can cascade over the edge of your pot.

9. Continue inserting flowers all around the tower, leaving one space between each flower. Your flower tower will look sparse at first but as the flowers grow, they will drape over the empty spots and it will look fuller. This is why you should pick a mounding flower. I bought 4 flats of flowers and I have just enough for 2 flower towers.

Here Comes the Sun: DIY Flower Tower

Here Comes the Sun: DIY Flower Tower

Here Comes the Sun: DIY Flower Tower
To finish off your flower tower, you can plant some flowers on the top and around the base.

Here Comes the Sun: DIY Flower Tower

I can’t wait to watch the flowers grow on fill in.  This is going to be such a beautiful addition to my porch.

Have you created a flower tower this year? 

To see another one of my planter projects, check out my Wheelbarrow Planter.

Don’t forget about my current giveaway going on for metallic paint or a metal effects kit from Modern Masters. You can enter here.

Let’s Keep in Touch!

9 Comments

  1. Looks great! Be sure to share an updated picture later this summer. Im interested to see how it grows!

  2. I saw this on TV, too! You did a GREAT job of putting it together. I might have to give it a try myself 🙂 I need some color by my front door.

  3. I love, LOVE this project, I considered it myself before settling on my whiskey barrel!! Yours looks totally gorgeous, I’m a fan of petunias already but it just really looks awesome! 🙂

  4. I know you mentioned this wasn’t the cheapest DIY but in was wondering how much approx it costs…I’m really tempted to try putting a spider plant or another draping plant at the top…

    1. Faith,

      I honestly can’t remember how much I paid for this. I had to buy the landscaping fabric, wire fencing, potting soil and plants. I had a lot of the wire fencing and fabric left over to use for other projects.

    1. I watered it by pouring some water into the top and I also poured some water into the holes in the middle if there was room after planting the flowers.

  5. I followed instructions exactly…so easy… beautiful results… you were correct that this isn’t a cheap project… I made two and spent about $120.00 on each. I made very large ones, each taking 8 cubic feet of soil. Soooo worth it….these planters are absolutely beautiful ?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.